MECREE launches new 1340W LED high mast lighting system

The world leader in lighting unveils a new range of MECREE LED high mast lighting products that offer even more flexibility, control, and design options for lighting designer.

What is high mast lighting?

To illuminate a large area or site, normal lighting poles are not practical so high mast lighting is used. It is the type of site lighting fixture mounted over at height. Normally it contains a pole that ranges from 40 to 150 feet pole. While four to 16 fixtures are mounted over it.

These types of lights are used in parks, airports and municipalities. Besides this, it is also used in sports venues like stadiums, etc. While talking about the structure high Mast Lighting Utilize High-intensity discharge lamps as (HID). An HID lamp includes Metal Halide and High-Pressure Sodium. Nowadays LED lighting fixtures are used instead of HPS and MH lamps.

Benefits of MECREE 1340W LED High-Mast Lighting System

It provides maximum illumination to sites or areas that require illumination. It consists of High Mast LED that generates light via a semiconductor as opposed to HID Lamps. Some of the benefits are listed below.

1. Lighting Performance

Due to the multi-point design, The led used in the high mast distribute the light in multiple directions. Even if you move away from the lighting pole still the lighting level will be maintained. Besides this LED’s are available in a different range of color temperatures. Due to which the visual perception of brightness increases.

2. Reduction in Maintenance Cost

The manufacturing process of the LED ‘s Used in High mast lighting is different.The Generated Voltage is degraded slowly with the passage of time. Therefore the life span of the LED is maximum. This feature reduces the maintenance cost of High mast Light fixtures for a long interval.

3. Energy Saving

In the past HIDs lamps were the standard lamps when lighting large areas. But these lamps have drawbacks this is because they contain gases like mercury vapor, metal halide, and high pressure sodium. So many manufacturers switched to LED lamps. One of the main advantages of LED is energy saving. Besides energy saving LED lamps are environment friendly.

The LED used in the high Mast lighting ranges from 490 to 2000 watt. The construction of the LED is made in such a manner that it consume 50 to 80% less electrical energy than other HIDs. The continuous use can save the amount in thousands of dollars.

Basic Rules for installation of High Mast Lighting

1. Masts should be located at a place. That the highest levels of illumination are in the areas of greatest informational needs, such as geometric changes and traffic conflicts.

2. Transitional effects should be considered on unlighted approaches to the interchange.

3. High Mast poles should not be located in the direct line of sight of drivers on the roadway.

4. Masts should be co-ordinated with signing to ensure that the light source is not directly behind the signs at a critical point.

5. Masts should not be located in gores, at the beginning of sharp curves, or other locations where there is a relatively high probability of an out-of-control vehicle.

The 1340W LED high mast flood light replaces 3000W metal halide lamps. High power LED high mast flood light used to illuminate the large areas such as sports facilities, golf course, football stadium, as well as commercial setting like airport, parking lot, port. With its anti-glare and explosion proof design, it can be applied to industrial areas such as factory and warehouse. Metal halide, halogen and fluorescent replacement is very common for outdoor lighting because of remarkable energy saving capability. Overall, MECREE 1340 watt high mast flood light LED will be your best choice if you are looking for the energy efficient, durable and affordable lighting solutions.

Please feel free to contact Team MECREE for much info if you are interested to get the free photometric lighting design.