banner

CONTAINER PORT LIGHTING

496 Published by admin 04 10,2021

Industrial and commercial container ports operate around the clock and require round-the-clock lighting due to the natural hazards of their location. Container port lights are designed to withstand the corrosive effects of salt water and exhaust fumes while maintaining a safe level of lighting for workers. Choosing suitable LED lights designed to withstand this unique environment is absolutely essential.

Where can you use LED port lighting?

The safety of the port depends to a large extent on good lighting. LED port lights can be used to illuminate container ports and seaports. Dockyards, container terminals and harbors require adequate lighting to ensure safe navigation, to be able to dock safely, to unload and load cargo, and to transport cargo safely in and out of the port.

What lights are suitable for the hockey field lighting?

 

Request Pricing Contractor / Bulk Pricing
Model: AFL-300W
Watts: 300W
Lead time: Sample in stock/bulk order depend on quantities
Color temperature: 3000K/4000K/5000K/5700K/6500K
Request Pricing Contractor / Bulk Pricing
Model: AFL-600W
Watts: 600W
Lead time:Sample in stock/bulk order depend on quantities
Color temperature: 3000K/4000K/5000K/5700K/6500K
football field lights Request Pricing Contractor / Bulk Pricing
Model: AFL-1000W
Watts: 1000W
Lead time:Sample in stock/bulk order depend on quantities
Color temperature: 3000K/4000K/5000K/5700K/6500K
football field lights Request Pricing Contractor / Bulk Pricing
Model: AFL-1200W
Watts: 1200W
Lead time:Sample in stock/bulk order depend on quantities
Color temperature: 3000K/4000K/5000K/5700K/6500K
football field lights Request Pricing Contractor / Bulk Pricing
Model: GL-FL-400W
Watts: 400W
Lead time:Sample in stock/bulk order depend on quantities
Color temperature: 3000K/4000K/5000K/5700K/6500K
football field lights Request Pricing Contractor / Bulk Pricing
Model: GL-FL-500W
Watts: 500W
Lead time:Sample in stock/bulk order depend on quantities
Color temperature: 3000K/4000K/5000K/5700K/6500K

How to find the best solutions for your seaport lighting projects?

A: Traditional lamps replacement

You can tell us the old lights type or spec and tell us if you ask same lighting requirements or higher than before, then we can give you the recommendation accordingly.

B: New port or under design

Already has ideas?
Great, we can bring your ideas and requirements into the solutions and design the best simulation according to your budget.
No any ideas at all?
It doesn’t matter, just tell us your requirements or your seaport details, and we can do different solutions with different designs for you until you are satisfied.

What should we consider for seaport lighting?

What can high quality LED seaport lighting bring to us?

Improve security

Handling bulk equipment and containers can be a challenge for workers. However, with Mecree Container Port Lights, you will notice better visibility, which will help improve the security level of the port, employees will be safer, and you won’t have to worry about their lives.

Energy and cost savings

Port lighting can be very expensive. If you are concerned about energy and maintenance costs, you should switch to Mecree Container Port Lighting as it allows you to benefit from energy and cost savings. Switch on and off to reduce electricity bills. These lights consume much less energy and provide better light output. Use its amazing lights to reduce energy consumption.

What’s the IP rating requested for container port lighting?

Ingress Protection (IP) Rating refers to the International Rating Standard. This rating is used to indicate the sealing effect of the luminaire against dust, water and moisture. Outdoor lighting should use IP65 LED lights at least. Seaport lighting is more demanding, LED container port lights in IP66 are needed, IP67 better.

What’s the IK rating requested for container port lighting?

IK grade refers to the international grade, it represents the protection level of the lamp against mechanical wear and its degree of accidental impact. When buying Seaport LED lighting, it is important to choose lighting fixtures with a higher IK rating. Therefore, this ensures that if the fixture is damaged, it will continue to work before you repair or maintain it. Lighting fixtures with IK ratings between IK07 and IK10 are ideal for high impact risk environments, IK08/ IK10 is recommended for container port lighting.

What’s the suitable color index and color temperature?

Most of clients choose 4000K or 5000K for their container port lighting.

Why we need container port lights to be anti-corrosion?

LED container port lights should be anti-corrosion, in order to be able to withstand extremely high or low ambient temperatures, humid ocean saline-alkali environment, otherwise you will have to repair or buy a new one to do the replacement once and once again in a short time. With Mecree real anti-corrosion seaport lights, you don’t need to worry about this problem.

Welcome to contact MECREE professional team for your LED container port lighting projects. More questions, just check on [email protected]

506pcs UL Listed GL-SFL-400W Sport Field Lights Shipping to United States

506pcs UL Listed GL-SFL-400W Sport Field Lights Shipping to United States  

Do you like ? 393

Read more

56pcs UL Listed GL-FL-650W Sport Field Lights Shipping to United States

56pcs UL Listed GL-FL-650W shipping to United States, used for Indoor athletics project, meeting ...

Do you like ? 386

Read more