banner

Product

pic
  • banner
  • banner
  • banner
  • banner
  • banner
  • banner

LED Airport Apron Lighting


Product Specification:

  • LED Brand LUMILEDS / CREE SMD5050
  • Power Supply Meanwell ELG Series
  • Supply Voltage 90-305V AC 50/60Hz
  • System Power 100W-2000W
  • Beam Angle 15/30/60/40*80/90*135
See Price

Do you want to know how much can be saving energy for LED to the replacement of conventional lights?
Are you still worried about the quality of the LED stadium lights?
Do you want to know how much you will save if using our lights?
Are you still worry about not finding a good quality, long life stadium light?
Do you want to do the best lighting design for your project?
Do you want to know what lights are used in the World Cup football field lighting project?

MECREE 300w 600w LED floodlight for airport apron lighting project

When you go to each airport at night, you will find there are kinds of lighting, ranging from white, yellow or blue colors. Because airport apron lighting is divided into different types. Each type with different standards such as general airport apron lighting. Taxiway lighting, Runway lighting. MECREE outdoor floodlighting will design the suitable lighting simulations to meet demands.
Including LED airport apron lighting with real anti-corrosion, high light transmittance (>98%), more stable to LED airport apron lights.

Key requirements for airport apron lighting

When it comes to the airport, the concept is widely. It can be used for aircraft parking, loading and unloading cargo, lane and pedestrian lighting, emergency maintenance etc.
1.The comprehensive requirements of the light is not too high.
Including color temperature 4000-5000 k. Choose low color temperature in fog day, light penetration is very strong, not recommend using high color temperature 6000-6500-7000 k, CR60-80.
2.The ways of installation requirements is very high
Due to the large site, multiple place are arranged at the same time, and the runway
is not complex, which requires sufficient space expansion, and the light pole cannot be very dense; On the other hand, there is high light pole around the runway of the airport, now the height of the ligh pole are between 20-35 m for all airport, lighting have single direction, 360 degrees, the pcs of lights are between 3 and 16. Because of the high pole so it need the light bright far away to the entire site to illuminate, the distribution of light to every corner, MECREE has five engineers designed specifically for your airport with double Angle, not only can bright the bottom of the light pole, but also can bright the distance between 150-300m.
airport apron lighting
apron lighting
Model: GL-SFL-300W, GL-SFL-600W
Power: 300W, 600W
Replace traditional MH light: 1000W, 2000W
Application:
MECREE LED lighting are most widely used in outdoor lighting, large airport project, stadium field lighting and so on.
Application reference: Lithuania Airport
Light: 300W LED airport apron lighting
Light QTY: 160pcs 300W
Beam Angle: 60+38Deg
CCT: 5000K
More outdoor lighting projects
At present, most of the light used in the airport apron is still MH lamp 250-1000W, the disadvantages of MH lamp is:
1.High light decay, high temperature
Light decay > 20% for one year, the inner core temperature is as high as 2000 ℃, the ultraviolet light is super strong, and the surface temperature of the outer glass reaches several hundred degrees. Under the condition of high temperature, if the normal work is under a sudden storm, and the glass is exposed to the risk of bursting and falling.
2. High cost
High cost of cable, over 50% higher compared with MECREE LED. High maintenance cost, frequent use of crane starter to replace the wick and vibrator, etc.
3. Waster of lighting
Although the light efficiency is 80-110 lm/w, because the high temperature, it does not make full use of it. When some of the emitted light is absorbed by internal reflection, it is not completely output; Another part is because the optical technologt is not well designed .and beam angle is not well controlled, resulting in waste of lighting.
4. Replaced products:
Due to the imprecision of beam angle, waste of light output and irradiation distance, the airport use MECREE Led GL-SFL series product 300W instead of 1000W and 600W instead of 2000W to save 80% energy efficiency.

MECREE LED airport apron lighting

apron lighting design
apron floodlighting
apron flood light
Project simulation - Based on the information of your project, MECREE LED will do simulation to see how many lights you needs and minimize the cost of the entire project.
Energy efficient - Lithuania's airports replace all 1000W MH lamps with MECREE GL-SFL-300W, save >80% energy. LED lights are new trend, not contain toxic substances such as lead or mercury.
Zero maintenance costs - MECREE LED with five-years warranty, even if more than five years, we will guarantee you certain technical and product support, which means that your airport will not need any maintenance and replacement costs for almost 10 years.
High brightness - DIWL optical calculus lens, multiple angles for your airport, bigger and more uniformity lighting throughout the field without any flickering, light decay<5% in 5 years. Great for visual enjoyment of the pilot.
Heat sink - Patented aluminum alloy heat sink, treated by powder spraying and electrophoresis to keep real anti-corrosion. Convection of air on all sides, good for heat dissipation, junction temperature < 65℃.
Saving costs - we will saving >$200,000 costs for your airport in five years.
Popular model: GL-SFL-300W/GL-SFL-400W/GL-SFL-600W/GL-SFL-800W


May you like

write us

Let's start design your lighting project. Please try to answer our following questions or call us.

1. What kind of field you need to light up? Is a new court or need to replace the old lamps?
2. If you need to replace the old lamps, what's your current lamps?
3. What's the size of your lighting field? How many poles? What's the height of your poles?
4. What's your lux request?
5. What's the quantity you need?




Contact Us For Quote and Lighting Opinion

Let's start design your lighting project.
Please try to answer our following questions or call us.

1. What kind of field you need to light up? Is a new court or need to replace the old lamps?

2. If you need to replace the old lamps, what's your current lamps?

3. What's the size of your lighting field? How many poles? What's the height of your poles?

4. What's your lux request?

5. What's the quantity you need?