With the development of the national economy, the role of port terminals as a transportation hub is becoming more and more important. As a distribution center for cargo and passenger flow, the port terminal plays an important role in berthing, loading and unloading cargo, and traveling to and from passengers. The loading and unloading tools of the port terminal are mainly gantry cranes. At present, the domestic port terminals are operated in 24H all-weather operation mode. High quality led floodlights are one of the necessary conditions to ensure the normal operation of the gantry cranes at night.
Port terminal lighting fixture selection considerations:
1.High power: Since the height of the gantry crane is about tens of meters, it has the characteristics of wide adaptability and large working range. In order to meet the illumination requirements of the working surface, the power of the general led lights should be above 400W.
2. Long service life: Due to the high height of the gantry crane, it is not easy to repair after led flood light is damaged, so it is necessary to install flood lights with a long service life.
3. Safe and reliable: There are many kinds of goods on the port terminal and the environment is complex. It is necessary to configure safe and reliable high mast lights to ensure the outdoor seaport lighting safety of the port terminal and prevent fire events caused by short-circuit of the led seaport lights.
4. High protection level: The port is in a humid environment all the year round, so the waterproof and dustproof level of the high mast lights are required to be high. The led seaport lights with high protection level can prevent the water vapor from entering the inside of the flood lights body and prolong the service life of the lamps. The lamp housing is made of high-quality aluminum alloy die-casting, and the outer surface is treated by high-pressure electrostatic spray to improve the overall anti-corrosion level of the product. The whole lamp has an independent heat dissipation system, the drive is external, and the power supply is internally sealed with a rubber seal to relieve heat. Waterproof, the protection level of the high mast lights reaches IP65 or higher, and there is no fear of the wet environment of the port terminal.
5, Good light transmission: due to the relatively heavy fog at the port terminal, in order to meet the illumination requirements of the port terminal working surface, it is necessary to use high light-transparent lighting fixtures.
6.Selecting international famous brand LED chips as the light source, low energy consumption and high luminous efficiency, saving a lot of maintenance costs for the port terminal.
7.The lens of the lamp uses high-transparent imported PC material, the light effect is even and soft, and it has two kinds of light distribution models: projecting light and flooding, which can meet different site lighting requirements. QC-FL042-A has a variety of mounting methods for seat, wall and ceiling to meet the installation requirements of different locations.
As the leader of outdoor high power floodlights, Mecree produces LED floodlights for indoor and outdoor venues in a variety of applications, such as ports, high pole lights, factories, warehouses, football fields, tennis courts, stadiums, etc. And MECREE's flood lights can be used perfectly in seaports, docks and other places where the lights have high requirements.
If you have ever seen a wreck, you know the dangers a car can present, primarily when driven at ...
In 2013, the Super Bowl was delayed after a power disruption knocked off some lighting. It didn’...