Not that you can do high power LED is an advantage, maybe it’s your greater risk.
Do you still worry will stadium lighting have a strong glare affecting the game?
Do you worry about a floodlight with a 4D radiator and the largest heat dissipation area in a high temperature outdoor environment?
Do you want to select the best stadium lights for tennis courts?
Do you want to save cost for a football field lighting project?
Do you want to know how much can be saving energy for LED to the replacement of conventional lights?
Are you still worried about the quality of the LED stadium lights?
LED Hockey Pitch Lighting
Lighting design principle of hockey pitch:
Lighting quality depends on illumination level, uniformity and glare control level. It should be taken into account that its output lighting will be reduced by dust or light decay. The light attenuation depends on the location of the ambient conditions and the type of light source selected, so the new initial illumination is 1.2 to 1.5 times the recommended light.
Glare depends on light density, projection direction, amount, position observed and ambient brightness.
In fact, the number of lights is related to the number of auditoriums. Relatively speaking, it is enough to choose a training ground with simple installation; But for large stadiums, more lights are needed to control the beam to achieve high brightness and low glare. In addition to glare for athletes and spectators, it also creates glare outside the stadium. But do not project light onto surrounding roads or blocks.
Key requirements for hockey pitch lighting:
1.Avoid light pollution
To avoid light pollution in the design of the stadium lighting requirements are very strict, the control of minor leakage will have a lot of bad impact.
Spill light not only causes waste of light and electricity, but also pollutes the environment and affects the quality of life of nearby residents.
Different from other suppliers, Our LED stadium light adopts precise secondary optical system, light through multiple reflections to the effective position, then the light are guided to the designated area so that reduce the light loss, not only in this way, our lens of glass material, is not afraid to be the impact, and not easy to broken, with zero light decay, make the effective utilization of light up to 98%, make full use of the light.
3.Lifespan of the lamps
Some electrical contractors may overlook the lamp’s service life. On the market, a lot of lamps and lanterns on the market falls after using 2 to 3 years, can see distinction apparently. And the damage rate of lamps is as high as 20 percent a year, frequent replacement also means high maintenance costs.But our lights have a lifespan of up to 18 years! (based on 12 hours a day, 365 days a year)
4.Color index and color temperature
The general color temperature requirement for all levels of the hockey pitch is greater than 5000K. Despite such advice, we usually use 5700K of cold white light to provide better lighting for players and viewers as these colors are more exciting. About the color index, The higher the index, the more realistic the color of the object. As usual, Our lights are Ra 80+, and Ra 90 + customizable.
Hockey Pitch Lighting Successful Case
Application reference: Hockey Pitch Lighting
Replace traditional MH light: 2000W
6 poles: 20m
Light: 800W LED hockey pitch lights
Light QTY: 32PCS
Light Average LUX: 500LUX.
1.Hockey is a powerful sport that involves fast sports. Bright, even light can help players find the puck and their teammates.The size of the standard hockey pitch is 91.4 x 55 meters.The results were surprising.Save $9,250 a year on electricity bills.While maintaining the same lumen output, the uniformity increased dramatically from 0.35 (MH) to 0.7 (LED).
2.Replace metal halide lamps with LED flood light, not only can have high lighting uniformity, but also can also reduce your electricity consumption.
How much money can you save by replacing MH lamps with LED?
To simplify the steps, we can calculate the reduced power consumption (i.e., 2000W MH-800w LED = 1200W saving).
For example, if the lights were on for 12 hours a day, the annual savings in electricity costs would be equal to,
（32 pcsx 1200W x12 hours）/ 1000 x $ 0.12 x 365days= $ 20,183.00
It’s been observed that after three years, you can even make a profit due to reduced electricity bills.
In addition, our LED sports lights have a lifespan of 80,000 hours, and 12 hours per day is about 18 years.
After changing the HID lamp, MHD lamp to LED, minimizes the cost of the installation and maintenance.
It is of great importance to choose the suitable type and high quality hockey lighting based on two basic reasons:
1.Make sure the players and spectators in the game will not be affected by the light, provide viewers with better viewing.
2.Make sure you don’t need to spend a lot of money on the installation and maintenance.
Illumination requirements for Hockey pitch lighting:
For sports fields, a good quality stadium light not only can bring a good game on HD live, but also have comfortable environment for players and audience.
Popular model: GL-SFL-800W, GL-SFL-1000W
Why choose MECREE?
1. MECREE is the only company determined to be a century-old company in the sports field.
2. Provide one-stop service for design, lighting and installation instructions.
3. World’s top design system, easy installation and more convenient maintenance.
4. 10 years focus on glare and light pollution control.
Why choose MECREE LED?
1. The new generation of high-density COB unique light distribution technology, it will be a revolutionary of traditional sports lighting.
2. 10-year constant illumination guarantee on site, 10-year system warranty, 10-year maintenance-free costs.
3. The original glare controller system can effectively control glare, enhance the comfort of sports and the experience of watching the game.
4. Separate control technology of lamps and drives increases the flexibility of the system and can effectively reduce the load on the road or light pole.
5. Advanced remote dimming function, which can automatically adjust the luminous flux output as required to meet the lighting needs of the venue.
6. Instant ON / OFF function meets the hot start function requirements, and can effectively combine sports games and stage performance functions.
7. MECREE’s lighting technology surpasses traditional lighting in the past, bringing a better experience to athletes, spectators and TV broadcasts.
8. We are not only the luminaire makers, but also designers for the comfortable light.
9. If the overflowing light of LED lamps shines on the residents’ homes, or scatter in the night sky to form light pollution, or even stimulate the eyes of athletes, it will be a big step back in sports lighting.
The use of LED lights in chicken farms for breeding is certainly a new thing and a new idea. Howe...
Why can fishing lights only catch phototaxis fish? Certain fish have a lightly-developed physiolo...